Automatic Linear Type Hot Glue Labeling Machine

Application: automatic bottle and container labeling on beverage and packaging lines.
Container / label: Container drawing, label material, dimensions and application position.
Capacity: 600BPM.
Labeling method: Selected from label material, container shape, application position and line speed.
Project scope: Standalone equipment or integration into a complete production line, based on the confirmed quotation.

Categories: Labeling machine, Products

Tip: You can request pricing for individual machines or a complete production line solution.

Factory-direct equipment and customization
Complete layout and utility planning
Installation, commissioning and training
24-month after-sales support

Brief Introduction

Automatic linear type OPP labeling machine is used in continuous roll label sticking on bottles by hot glue. It uses local glue spraying method. It consumes less glue and has low running cost. The maximum speed is 600BPM, which is mainly suitable for high-level drinking water and soft drink.,etc production.OPP labeling machine working more high speed and quiet, low glue consumption, compare with shrink label, its lower cost in material.

Video

Product Features

1.The linear type hot glue labeling machine adopts quick release type of construction. In order to change and adjustment easier.

2.Centralized lubricating system for simple and effortless on maintenance, lubrication and cleanness.

3.With photo-sensors to detect label output and automatically self- regulated production speed for integrating production line with other machines.

4.The labeling machine adopts stable and resonable of compiling program. It can be suitable for oeration 24 hours.

5.Equipped with the torque limiter would control the torsion range abnormal situation of machine. It will reduce the ccident for operate.

6.Roller coating, gluing balance and glue saving.

7.The labeling machine production speed is control by the machine input bottle signal. It’s automatic transmission. When the mchine output botttle stock then the machine will be transmission speed to slow. If output bottle is smooth the machine will be increase the speed.

Product Configurations

Name	Supplier
PLC	DELTA-Taiwan China
Servo Motor&Driver	DELTA-Taiwan China
Inverter	DANFOSS-Denmark
Touch Screen	WEINVIEW-Taiwan China
Label correction device	E+L-Germany
Low Voltage Electrical Parts	SCHNEIDER-France
Sensor	KEYENCE-Japan

Product Parameters

Model	Capacity (BPH)	Labeling accuracy (mm)	Bottle Diameter (mm)	Label Height (mm)	Label thickness (mm)	Dimension (mm)
HG-8K	8000	±1	φ55-φ120	40-200	0.035-0.13	225020002050
HG-12K	12000	±1	φ55-φ120	40-200	0.035-0.13	225020002050
HG-15K	15000	±1	φ55-φ120	40-200	0.035-0.13	225020002050
HG-18K	18000	±1	φ55-φ120	40-200	0.035-0.13	225020002050
HG-24K	24000	±1	φ55-φ120	40-200	0.035-0.13	225020002050

Frequently Asked Questions

What information is needed to configure the Automatic Linear Type Hot Glue Labeling Machine?

Please provide container and label drawings or samples, label material, dimensions, application position, required line speed and conveying direction. HZM uses them to confirm the labeling method, handling parts and machine interfaces. The current product specification references 600BPM; final guaranteed output is confirmed against the approved operating conditions.

Which label and container samples are required?

Physical samples are preferred for final engineering. Label thickness, stiffness, shrink ratio or adhesive behavior, together with container shape and surface condition, affect feeding, positioning and application accuracy.

Can the machine handle several bottle and label formats?

A defined format range can normally be engineered with recipes and change parts. The exact changeover scope is confirmed from every approved container and label sample rather than assumed from nominal dimensions alone.

Can this equipment be integrated into a complete production line?

Yes. HZM can coordinate upstream processing or bottle making with filling, labeling, coding, packaging, conveying and palletizing. Layout, utilities, controls, factory testing, installation, commissioning and training are defined by the agreed project scope.