Product families
Equipment for the complete production line
20+years of packaging engineering
About HZM
One partner from process planning to stable production
HZM Machinery supplies integrated liquid beverage packaging systems. Our engineers coordinate water treatment, beverage processing, container handling, filling, closing, inspection, labeling and secondary packaging around your product and capacity.
- Turnkey line layout and utility planning
- Factory testing and documented commissioning
- Installation, training and spare-parts support
Turnkey solutions
Production lines matched to your beverage
Global customers
These customers choose to work with us
Service resources
Technical Support
Global delivery
Recent customer projects
2025-12-10
1,200 BPH Fully Automatic 5L Water Bottling Line in Africa
A 1,200 BPH fully automatic 5L water bottling line delivered in Africa, integrating bottle feeding, rinsing, filling, capping, coding, packing and palletizing.
Learn more
2024-05-29
24,000 BPH Mineral Water Production Line Commissioned in Africa
A 24,000 BPH mineral water production line was installed and commissioned for an African customer, adding efficient local bottled-water capacity.
Learn more
2023-12-11
25 T/H Nanofiltration Water Treatment System Delivered to Indonesia
HZM delivered a 25 T/H nanofiltration water treatment system and air-compressor package for an Indonesian customer treating low-TDS water.
Learn moreKnowledge center
Filling and packaging insights
2026-08-23
Bottle Rinser Has Low Spray Pressure: Causes and Repair Steps
Check whether the loss affects the entire rinser or only several nozzles. System-wide loss points to supply, pump, filter or valve problems; a local pattern points to blocked nozzles, damaged tubing or a misaligned bottle. Follow this practical fault-isolation, repair and prevention guide for bottling-line operators and maintenance teams.
Learn more
2026-08-20
Bottle Conveyor Jams at the Same Location Every Shift
Mark the first contact point and inspect guide transitions, chain condition, dead plates, speed change, bottle dimensions, lubrication and upstream accumulation. The pile-up often occurs downstream of the actual interference. Follow this practical fault-isolation, repair and prevention guide for bottling-line operators and maintenance teams.
Learn more
2026-08-16
Glass Bottle Fill Levels Vary by Valve: How to Isolate the Fault
Map the defect by filling valve and bottle lot. Verify bottle internal-volume variation, lift and seal condition, vent-tube depth, valve cleanliness, tank level and product pressure before altering the global fill-height setting. Follow this practical fault-isolation, repair and prevention guide for bottling-line operators and maintenance teams.
Learn more