Name: Liquid PET Bottle Filling Machine
Brand: HZM Machinery

Brief Introduction

The PET liquid packaging combiblock integrates preform heating, bottle blowing, filling and capping. It is used for water and beverage packaging, with a maximum bottle volume of 2 L. The equipment range covers 12,000–48,000 bottles/hour at 500 ml.

Video

Product Features

1.Put pre-forms into hopper of auto sending device，send to heating stove through belt and drum unit.

2.Bottle pre-forms are sent to pre-form base by guide turn table, the bases get pre-forms and then send to stove for heating one by one.

3.The heating stove has 8-floors infrared lamp to heat pre-forms, the pre-forms run itself and also the infrared lamp can be adjusted temperature independently.

4.Heating stove has pre-form screw head cooling way and stove ventilation and cool air duct, it ensures that pre-forms will not be hard warmed.

5.Discharge warmed pre-forms to outlet guide by discharge pre-form cover, put pre-forms into blowing moulds by manipulator, seal the bottle mouth and extrude the body, also inlet two grade air pressure(pre-blowing pressure and high pressure air) and make pre-form to be bottles. According to the requirement of art, there will inlet cooling water for moulds, all above processes are controlled by main machine computer.

6.After blowing, the manipulator get bottles out of mould and the qualified bottle will be send to guide, this guide can be connected directly to filling line and also can connect to conveying chain, send to bottle warehouse.

Product Configurations

Name	Supplier
Main Motor & Reducer	SEW-Germany
Inverter	LENZE/SCHNEIDER-Germany/France
PLC	LENZE/SCHNEIDER-Germany/France
Touch Screen	LENZE/SCHNEIDER-Germany/France
Low Voltage Electrical Parts	SCHNEIDER-France
Photoelectric Switch	BANNER-USA
Hot Relay	SCHNEIDER-France
Air Switch	LEUZE/BANNER-Germany
Photoelectric Switch	BANNER-USA
Proximity Switch	Turck-Germany
Rotary Support	ROTHER ERDE/ ROLLIX-Germany/France
Linear Guide Rail	REXROTH-Germany
Pressure Adjust Valve	EWO-Germany
Safety Valve	EWO-Germany
Auto Lubrication System	BEKA-Germany

Product Parameters

Name	Tech. Data
Nominal capacity for 500ml (BPH)	12000-48000
Rate of finished product (%)	99.5
Mould cavities (N)	6-24
Filling heads(N)	24-80
Capping heads(N)	8-22
Max bottle diameter (mm)	110
Max bottle height(mm)	340
Max bottle mouth diameter (mm)	38
Max preform height (mm)	135
Max volume（ml）	2000
Medium power absorbed (%)	60
Voltage permitted (%)	+/-5%
Frequency permitted (%)	+/-1%
Voltage auxiliary (VDC)	24

Frequently Asked Questions

What information is needed to configure the Liquid PET Bottle Filling Machine?

Please provide the product recipe or liquid characteristics, container and closure drawings or samples, required sustained output, utilities and factory layout. HZM uses these details to confirm the filling method, machine model and line interfaces.

How is the correct filling method selected?

The filling method depends on viscosity, carbonation, temperature, particles, foaming behavior, hygiene requirement, container and closure. HZM confirms the process only after reviewing the actual product and package.

Can the machine handle more than one bottle or package format?

A defined format range can often be supported with recipes and change parts. Compatibility is confirmed from approved drawings or samples because container diameter, height, neck finish, closure and handling stability affect changeover scope.

Can this equipment be integrated into a complete production line?

Yes. HZM can coordinate upstream processing or bottle making with filling, labeling, coding, packaging, conveying and palletizing. Layout, utilities, controls, factory testing, installation, commissioning and training are defined by the agreed project scope.