Three common faults and quick solutions for automatic labeling machines

Labeling machines are widely used in the beverage packaging industry. In recent years, with the continuous development of the video beverage industry and the continuous progress of labeling technology, the labeling machine equipment selected by the beverage packaging industry has gradually put forward higher requirements.

At present, the labeling machine has gradually entered the era of fully automated labeling. Fully automatic labeling machine is favored by the pharmaceutical packaging industry because of its high stability and perse functions, which can effectively reduce the cost of traditional labeling machines.

There are many types of automatic labeling machines in the packaging market, and companies can also customize them according to the special needs of users to meet the packaging needs of food and beverage industries.

With the continuous upgrading of consumer consumption levels and the increasingly fierce market competition, some labeling machine manufacturers should continuously learn to introduce international technology, enhance the R&D team to focus on the intelligentization of automatic labeling machines, and make products have technological advantages Synchronization; some manufacturers control quality requirements and strictly control every link of production to ensure product quality.

However, no matter how good the quality of the equipment, users will inevitably have some minor problems or some minor faults in the process of using the fully automatic labeling machine. Therefore, the user needs to grasp the common fault causes and solutions.

Common failure one: broken label

According to feedback from many users, the automatic labeling machine often breaks the label during the operation, that is, the label is damaged during the towing process. So what should I do if this problem occurs?

An engineer from a labeling machine manufacturer said that the label is broken because of label quality problems. In this situation, in addition to replacing the quality label paper, the user also needs to pay attention to avoiding scratches on the label. Once there is a label that is easy to break, the user needs to pay attention to control. Only the label quality is guaranteed. At the same time, the labeling machine can be operated better.

Common fault two: deviation

Deviation is also very common, that is, the label position is not correct or accurate. It is understood that if the fully automatic labeling machine operates for a long time without overhaul, there will be very deviations, including label deviation, or unstable trend, slipping traction, and insufficient packaging materials.

How to deal with this kind of problem? The engineer said that at this time, the label needs to be straightened first, so that the label can walk on the right path, and at the same time adjust the inclination of the label to achieve parallel labeling.

In addition, in the production process of packaging materials, attention should be paid to controlling the deviation of the edge position. Only by ensuring the quality of the material can the problem of deviation be completely solved.

Common failure three: continuous bidding

It is understood that when the automatic labeling machine is working, it often encounters continuous labeling. At this time, if adjusting the electric eye still cannot solve it, it means that the device has exceeded the applicable scope.

In this case, the user needs to pay attention to whether the label is biased. If the electric eye cannot detect the existence of the label, the position can only be detected if the position is adjusted accurately.

In addition, in the traction speed, the user should also note that the labeling speed can be adjusted on the control panel of the automatic labeling machine, and the labeling quality can only be guaranteed if the speed is reasonable.

Conclusion

Generally speaking, although the automatic labeling machine is simple to use, it is inevitable that some small faults will occur in the actual application process. In the process of using the fully automatic labeling machine, if the user encounters a problem, it needs to be discovered and solved in time, and if the treatment is in place, the small faults in the labeling process can be effectively solved.

Of course, if the above methods still cannot solve the problem of the equipment failure, the user can find a professional labeling machine supplier like HZM Machinery for consultation and maintenance, and the equipment can be restored to normal production in time to ensure the stable operation of the work.