Insights & Updates
12t/H Beverage Processing System Hs Series Microprocessor Co2 Mixer
| High Light: | 12t/h beverage processing system, 12t/h co2 mixer, microprocessor co2 mixer | ||
|---|---|---|---|
HS series CO2-Water-Syrup Mixer is specially used for producing carbonated drinks. It can mix CO2, water, syrup at one time and supply it to filling machine.
Features
(1) Adopt advanced technology of chemical industry-static mixer to mix CO2 with water and syrup. The machine has superior quality, wide mass transfer of gas-liquid,low resistance loss,high efficiency,low energy consumption,simple structure and etc.
(2) Mixing rate is accurate and easy to be adjusted. Syrup and water mixing proportion, productivity can be adjusted without changing any parts.
(3) Adopt vacuum degassing method to eliminate the superfluous gas in the purified water and get a good CO2 solution.
(4) Easy to adjust the CO2 content in carbonated drinks. According to the requirements of CO2 multiple in the drinks, we can adjust it by operating the CO2 box to achieve the requirements.
(5) PLC with microprocessor. It makes the motions of machine more harmony and realizes production continuously. Structures are very simple and automation is high.
(6) Designed with CIP cleaning process. It can implement chemical disinfection, hot water rinsing and purified water rinsing conveniently. It meets the requirements of food hygiene law.
Basic parameter
|
12 |
|
12g/L≥g≥4.9g/L |
|
0.3-0.5 |
|
0.2-0.3 |
|
0.7-0.8 |
|
>99.99% |
|
≤10 |
|
≤8 |
|
≤4 |
|
0 |
|
φ50.8×1.5 |
|
φ38.1×1.5 |
|
φ19×1.5 |
|
have |
|
About 100L/min |
|
2400X1500X2500 |
|
About 2000 |
|
10 |
|
3N–50Hz,AC380 |
Talk to our engineering team
Need help planning your packaging line?
Share your product, bottle and capacity requirements for a practical equipment recommendation.
Equipment
Carbonated Drink Co2 Mixer Machine
This Carbonated Drink Co2 Mixer Machine is configured for carbonated soft drinks, soda water and other sparkling beverages; final scope follows the approved process,…
Learn more
Equipment
Automatic Beverage Processing System
This Automatic Beverage Processing System is configured for the liquid product and package range approved for the project; final scope follows the approved process,…
Learn more
Equipment
Beverage Filling Machine & Turnkey Filling Line for Juice, Soft Drinks and Cans
This Beverage Filling Machine & Turnkey Filling Line for Juice is configured for juice, tea, carbonated soft drinks, energy drinks, water and beer at…
Learn more
Equipment
Bottled Water Filling Machine & Turnkey Water Bottling Line
This Bottled Water Filling Machine & Turnkey Bottling Line is configured for purified water, mineral water and still drinking water at 5,000–42,000 bottles/hour; final…
Learn more
2026-09-04
RO Differential Pressure Keeps Rising: Fouling Location Matters
Locate the stage where pressure loss is increasing and relate it to normalized flow and salt passage. A first-stage rise often points to particulate or biological fouling; a later-stage rise can indicate scale, but feed analysis is required. Follow this practical fault-isolation, repair and prevention guide for bottling-line operators and maintenance teams.
Learn more
2026-09-02
Custom Plastic and Hardware Components Used in Beverage Packaging Machinery
Learn how plastic injection molded parts and custom hardware components are selected, manufactured and inspected for beverage filling and packaging machinery.
Learn more
2026-09-02
How to Plan Safe Access for Beverage Production Line Installation and Maintenance
Practical guidance on planning operating platforms, walkways and temporary access for beverage production line installation, inspection, cleaning and maintenance.
Learn more
2026-09-02
Why Do Filling Valves Drip After the Bottle Leaves?
Dripping usually comes from contamination on the valve seat, worn or swollen seals, trapped pressure, incorrect closing timing or product viscosity outside the setup window. Identify whether the leak follows one valve or the entire filler. Follow this practical fault-isolation, repair and prevention guide for bottling-line operators and maintenance teams.
Learn more
2026-08-28
Sleeve Labels Wrinkle After the Shrink Tunnel
Determine whether the sleeve was straight before entering the tunnel. Then check film shrink curve, tunnel-zone temperature, airflow or steam distribution, bottle moisture, conveyor speed and container geometry. Follow this practical fault-isolation, repair and prevention guide for bottling-line operators and maintenance teams.
Learn more
2026-08-23
Bottle Rinser Has Low Spray Pressure: Causes and Repair Steps
Check whether the loss affects the entire rinser or only several nozzles. System-wide loss points to supply, pump, filter or valve problems; a local pattern points to blocked nozzles, damaged tubing or a misaligned bottle. Follow this practical fault-isolation, repair and prevention guide for bottling-line operators and maintenance teams.
Learn more