Glass Bottle Filling Machine – DXGF14-12-5

Model : DXGF14-12-5.
Capacity : 2000~3000 BPH (Bottles per Hour).
Function : Integrated rinsing, filling, and capping.
Applicable Products: Carbonated drinks, plastic pre-screw cap soft drinks, cola, sparkling wine, mineral water, and other beverages.
Bottle Type: Glass bottles.

Categories: Filling machine, Products

Tip: You can request pricing for individual machines or a complete production line solution.

Factory-direct equipment and customization
Complete layout and utility planning
Installation, commissioning and training
24-month after-sales support

Brief Introduction

DXGF(I)14-12-5-type isobaric filling machine is 3-in-1 which combines rinsing; filling and capping in one machine. The equipment is innovated and developed based on the introduction, digestion and absorption of foreign advanced technology and according to the gas-bearing beverage filling process requirements. It is mainly used for carbonated drinks, filling and capping plastic pre-threaded cap soft drinks, cola, sparkling wine, mineral water, beverages etc. The machine has reasonable structure, safe, reliable, easy to maintain and it is the ideal equipment for beverage filling factory.

Video

Product Features

Technical Parameters

Model No.	DXGF14-12-5
Number of service position of the “Rinsing valve”	14
Number of service position of the “Filling valve”	12
Number of service position of the “Capping head”	5
Bottle model	Glass Bottle
Bottle height	150-320mm
Bottle diameter	φ50-φ108mm
Air pressure	0.7MPa
Air consumption	0.8M³/min
Washing pressure	0.2~0.25 Mpa
Washing water consumption	0.5T
Filling type	Isobaric filling
Filling temperature	≤5℃
Power of the main motor	3.0 KW
Stable capacity	2000~3000BPH for 0.75L
Size of outline	236017702700 (L×W×H)
Weight	4000KGS

Main features

1. Compact structure, beautiful appearance, easy operation, high automation, low labor intensity
2. Bottles transmission adopts bottom support technology, no need to adjust the equipment height when changing bottle volume, simply replace guide plate, thumb wheel that related to the bottle diameter and height.
3. The parts that direct contact with product are made of SUS 316L stainless steel.
4. Valve opening device is driven by the cylinder; open the valve in time according to the signal, movements are accurate and reliable.
5. High-speed high-volume, high precision filling valve, filling fast, accurate and non-liquid fluid loss
6. Using deflection regulating valve, continuous control of fluid materials flow, so that hydraulic cylinder to maintain a smaller level fluctuations, to ensure filling accuracy
7. Equipped with CIP circuit and control procedures, equipment is cleaned in place.
8. Capping head adopts constant magnetic torque device to ensure the seal of quality, and will not damage caps
9. Efficient use of the cap sorting system, with a perfect cap lacking protective device.
10. Bottle-outlet thumb wheel adopts downward spiral approach, when changing bottle volume, no need to adjust conveyor height.
11. With complete overload protection device, which can effectively protect the equipment and the operator’s safety

Frequently Asked Questions

What information is needed to configure the Glass Bottle Filling Machine?

Please provide the product recipe or liquid characteristics, container and closure drawings or samples, required sustained output, utilities and factory layout. HZM uses these details to confirm the filling method, machine model and line interfaces. The intended application is carbonated drinks, plastic pre-screw cap soft drinks, cola, sparkling wine, mineral water, and other beverages. The current product specification references 2000~3000 BPH (Bottles per Hour); final guaranteed output is confirmed against the approved operating conditions.

How is the correct filling method selected?

The filling method depends on viscosity, carbonation, temperature, particles, foaming behavior, hygiene requirement, container and closure. HZM confirms the process only after reviewing the actual product and package.

Can the machine handle more than one bottle or package format?

A defined format range can often be supported with recipes and change parts. Compatibility is confirmed from approved drawings or samples because container diameter, height, neck finish, closure and handling stability affect changeover scope.

Can this equipment be integrated into a complete production line?

Yes. HZM can coordinate upstream processing or bottle making with filling, labeling, coding, packaging, conveying and palletizing. Layout, utilities, controls, factory testing, installation, commissioning and training are defined by the agreed project scope.