Packing 500 ml Glass Bottles Without Transfer Damage
A glass-bottle packer must handle the complete bottle group without neck contact, uncontrolled impact or excessive carton force. A 500 ml capacity identifies the liquid volume, not the bottle dimensions or gross pack weight.

Check grouping before loading
Observe bottle spacing and the first point where containers contact each other. Verify the carton’s internal dimensions and any required dividers against production bottles. A group that enters skewed cannot be corrected reliably by increasing loading force.
Inspect after handling
Check chips, scuffing, broken bottles and carton deformation at discharge and after normal pack movement. Include an infeed gap and restart. Acceptance should count intact packs rather than loading cycles alone.
Need help planning your packaging line?
Share your product, bottle and capacity requirements for a practical equipment recommendation.