PP Membrance Stainless Steel 304 RO Water Treatment System

release time                        
Update:Jun, 12 /2023

PP Membrance Stainless Steel 304 RO Water Treatment System

Pressure Model: Normal Pressure Materials: Stainless Steel 304 Or 316 (decided By Water Quality)
Output: 1-100T Operational Mode: Manual Operation
Membrance Materials: Modified Polypropylene (PP) Pure Water Flux (L/H,0.12Mpa,25°C): 10000L
Operating Temperature: 5℃-45℃ Microorganisms, Pathogene: 99.99% Of Them Are Removed.
High Light: 304SS RO Water Treatment System, 316SS RO Water Treatment System, 304SS industrial reverse osmosis system

PP Membrance Stainless Steel 304 RO Water Treatment System


Manual Operation RO Water Treatment System With PP Membrance

Our RO water treatment system is composed of Silica Sand Filter, Active Carbon Water Filter, Sodium Ion Exchanger, Precision Water Filter, Ultrafiltration Water Filter, Reverse Osmosis and Water Tank.

Pressure Model

Normal Pressure


Stainless steel 304 or 316 (decided by water quality)



Operational Mode

Manual Operation

Membrance Materials

Modified Polypropylene (PP)

Pure Water Flux (L/H,0.12Mpa,25°C)


Operating Temperature


Microorganisms, Pathogene

99.99% of them are removed.


Silica Sand Filter

Silica sand filter is a kind of water treatment equipment. It is widely used to filter suspended solids, particles and colloidal substances in water.

Our silica sand filter is filled with silica sand, anthracite and other filter materials. Due to the reasonable filling method and metering method of the filter material, its filtering effect is very good. The height of the filter layer is above 1200mm.


Active Carbon Water Filter

Activated carbon water filter is a water treatment equipment used to improve water quality and taste. It is made of stainless steel and filled with nutshell-shaped activated carbon. Activated carbon is used to absorb dissolved impurities and unpleasant taste in water. At the same time, it can also remove organic matter, toxic chemicals and chloride ions from the water, and protect the RO membrane from free chlorine damage.


Sodium Ion Exchanger

The sodium lon exchanger is water treatment equipment. It is mainly used to remove calcium ion and magnesium ion from raw water to make water softer.
Our sodium lon exchanger is born to solve this problem. It uses its sodion to exchange calcium ion and magnesium ion of raw water through ion exchange resin. This can effectively prevent the generation of carbonate scale and sulfate scale, and thus produce soften water.
The centrifugal multistage pump is required to be installed in the filter. It can provide brine and extract sodion from it. The salt melting tank of 500L is required. Users can add industrial salt and water into it, and make water saturated.

Precision Water Filter

Precision water filter is a kind of water filtration equipment, also known as cartridge filter. It is used to prevent fine particles and other impurities from penetrating into high-pressure pumps and reverse osmosis membrane modules. Its accuracy is in the range of 0.10 to 60 μm. The filtration accuracy of the filter membrane is not affected by the feed pressure.

It should be emphasized that when the pressure difference of the precision water filter is higher than 1.07Mpa, the filter element must be replaced or cleaned.


Ultrafiltration Water Filter

The ultrafiltration water filter is water purification equipment. It is mainly used to remove bacteria, rust, colloidal matter, and other impurities from tap water, and remain trace elements, mineral substances and other substances which are good for humans'health.


Reverse Osmosis

The reverse osmosis is water filtration equipment. It is the main part of purified water system. It can remove inorganic salt, organic matter and microorganism.


Water Tank

The water tank is a kind of water treatment equipment. It is made of stainless steel 304 or 316. Its surface is polished, and the roughness is Ra0.4μm.

Our water tank is equipped with air respirator, liquid indicator and manhole. It is widely used in food and drink industries.


Quality Control

To guarantee the excellent performance of our beverage production lines and beverage machinery, we introduce advanced technology from Germany and Italy, and constantly improve our production technology of liquid filling. Apart from that, free trainings are offered to our employees to help them improve technical skills. In addition, we strongly believe that beverage production lines and beverage machines with high pass rate and reliable quality can effectively reduce production cost. Thus, we strictly implement product inspection in every step of production, from raw material acquisition to shipping our finished products, to ensure the quality and pass rate. Besides, much attention is also placed on perfect management system and high quality employees for a higher working efficiency.

TAG:  304SS industrial reverse osmosis system  304SS RO Water Treatment System  316SS RO Water Treatment System  RO Water Treatment System

Contact us
Unser 24h Service-HelpDesk hilft Ihnen gern weiter:
24-Hour Telephone
You can obtain the price for individual equipment as well as solutions for the entire production line.

* Is required
Close Ico

Submitted successfully

We have received your message and will get in touch with you as soon as possible to provide you with the corresponding service

We use cookies to provide and improve our services. By using our site, you consent to cookies.