Bottled Juice Packaging Machine

1.This packaging machine is an equipment that integrates washing (disinfectant washing, pure water washing), filling, and capping.

2.This juice packaging machine employs the full filling method to avoid bottle deformation after cooling and minimize oxygen dissolution to the maximum extent.

3.The juice filling machine’s material hopper and feeding system are designed for rational product feeding (constant flow, constant pressure, and no foam). Typically, high-level tanks are used for product supply.

4.The equipment’s material hopper structure is reasonable (venting, fully enclosed, temperature-detectable). In medium to high-speed lines, a product distributor is used instead of a large liquid turntable for thorough cleaning through CIP pressure washing.

5.The bottled juice packaging machine utilizes a sanitary filling valve system with an umbrella flow structure to ensure high-speed filling.

6.The hot filling machine is equipped with a comprehensive temperature control system for hot filling.

7.The juice packaging machine features a product recovery tank system structure and automatic initiation of product feeding.

8.This product incorporates a comprehensive CIP system to ensure product hygiene and safety.

9.Rapid flow, highly filling precision, nicety liquid level without any liquid loss to satisfy the filling process demand.

10.All control is advanced touch-screen operation and realize people-computer dialogue operation.

Rinsing Part
1. The sealing ring is made of EPDM material, and plastic is made of UMPE.
2. The gripper equipped with high-efficient spray nozzle, it can develop to any position of inwall of the bottle, and can save rinsing water.
3. There is a cover above the spray nozzle which can prevent water spilling; and there are regulatory recycle slot and recycle pipes under the nozzles.

Filling Part
1. The filling system has CIP circulation system to wash the pipeline and fake-cup used for cleaning filling valve.
2. The pressure mechanical valve is introduced the advanced foreign design with a fast filling speed, no hygiene corner pocket, a few sealing parts, and precise liquid level control.
3. This filling system has an automatic temperature control system.

Capping Part
1. The screwing capping head is dual-purpose design; it is suitable for flat cap and sport cap.
2. There are aseptic nozzles between the transition poking wheel and filling parts to rinse the product rested in the bottleneck screw parts.
3. There is a cap-lock cylinder in the joint between the cap-falling guide and cap distributor.