Name: 5 Gallon Bottle Blow Molding Machine
Brand: HZM Machinery

Brief Introduction

This machine consists of main unit and rotary infrared heater. The ordinary quartz lamp cannot heat preform ideally because the preform wall is excessively thick. The infrared heater with high penetrative force can heat the inside and outside of preform simultaneously and keep preform in even heating, therefore high shaping quality.

What an operator should do during production is just to put heated preform into the blow mold and press the switch, and then computer will take care of the whole procedure.

Video

Product Features

Product Introduction

1.Special design for PET Gallon Bottle up to 6 Gallon.

2.Produce wide mouth jar up to 25 liter with neck size up to 200mm.

3.Using Infrared reheat units to achieve uniform heating throughout the wall of preform.

4.Adopt special designed preform heating system to ensure the optimal heating effect for 730g thick-wall preform.

5.Special designed fan-cooling system in the heating channels to keep the oven with constant temperature and ensure the preform can be heated completely.

6.Water cooling system ensures the quality of preform neck.

7.Up to 90 bottles/hour using one-cavity mold for 5-gallon bottle.

8.Use advanced PLC control system with counting function and time-control precision to 0.01second, and a use-friendly panel.

9.Equipped with special designed air storage units.

10.Simple installation & startup adjustment.

Product Parameters

Theoretical output	60-120BPH
Max. mould plate Dimension(L x W)	400x450mm
Max.mould thickness	370mm
Clamping force	150KN
Mould opening stroke	350mm
Blowing air pressure	≤3.0 Mpa
Working Pressure	≤1.0mpa
Main machine (L x W x H)	19008001600(mm)
Main machine weight	1450KG
Power	20KW

Name	Item	Unit	Tech. Data
Blowing Part	Volume of Product	L	10-20 (1 cavity)
	Reliable Minimum Capacity	pcs/h	100-120
	Neck Diameter Range	mm	25-60
	Max Container Diameter	mm	280
	Max Container Height	mm	480
	Mould Stroke	mm	≤330
	Max Mold Thickness	mm	450
	Clamping Force	T	35
	Working Pressure	Mpa	≤1.0
	Blowing Air Pressure	Mpa	≤4.0
	Air consumption	m3/min	1.6
	Power of Main Blower	KW	2
	Measurement of Main Blower	mm	18007702000
Preheater Part	Power of Preheater	KW	16
	Weight of Preheater	kg	600
	Measurement of Preheater	mm	26506701550

5 Gallon Bottle Blow Molding Machine Flow Layout

Frequently Asked Questions

What information is needed to configure the 5 Gallon Bottle Blow Molding Machine?

Please provide the bottle drawing, volume, neck finish, preform specification, bottle weight, resin, required output and available high-pressure air conditions. These details determine the mold, heating, blowing and auxiliary-equipment configuration.

What determines bottle compatibility and production output?

Bottle geometry, volume, preform weight, material distribution, cavity count, heating time and compressed-air capacity all affect stable output. The committed performance is confirmed after reviewing the approved bottle and preform.

Can one machine produce different PET bottle formats?

Often yes within an engineered range, using suitable molds and change parts. Each bottle and preform combination must be checked because neck finish, heating profile, stretch ratio and air demand can differ.

Can this equipment be integrated into a complete production line?

Yes. HZM can coordinate upstream processing or bottle making with filling, labeling, coding, packaging, conveying and palletizing. Layout, utilities, controls, factory testing, installation, commissioning and training are defined by the agreed project scope.

Our Factory

Beverage Packaging Machine Assembly Workshop

International Customers Visiting HZM Machinery Factory

HZM Engineers Discussing a Beverage Production Line with Customers

Learn more

5 Gallon Bottle Blow Molding Machine